Showing posts with label dolby. Show all posts
Showing posts with label dolby. Show all posts

7/23/2012

Denon AVR-2807 - AV receiver - 7.1 channel Review

Denon AVR-2807 - AV receiver - 7.1 channel
Average Reviews:

(More customer reviews)
My old, stereo-only system consisted of several high-quality source components, separate tuner/preamp/amplifier, and a pair of very sweet (but rather low-efficiency) classic B&W speakers. When the preamp and amp both died after many years of service, I replaced them with the 2807, and added Polk center and surrounds for a 5.1 configuration. The 2807 makes my faithful B&W front speakers sing every bit as sweetly as my old audiophile separates did, with plenty of power to spare. Today my kids were watching Titanic with the master volume set just a wee bit high, and from two rooms away I thought the iceberg was colliding with the HOUSE. (The volume knob covers a rather impressive -80db to +18db range in 0.5dB increments). You even get TWO sets of amplified front speaker outputs, so you can bi-amp or bi-wire your main speakers if you want! And the 2807's quality is not only in the amplifier stage, but also in the DACs. CDs played through a digital input and handled by the 2807's processors are very smooth and detailed.
(If I may insert one gripe re the amplifier: the speaker binding posts are not at ALL flexible. Using spade lugs or pin connectors is pretty much out of the question. Getting the posts to even cleanly accept heavy-gauge bare wire is difficult. Banana plugs work of course, but the posts aren't spaced correctly for standard DUAL-banana plugs. Arrrgghh!)
Surround decoding and ambience processing is also generally excellent. For instance, using Dolby Pro Logic II with a stereo source like a CD generates a pretty nicely stable center image and subtle, unobtrusive surround enhancement; only occasionally will you hear things "breathe" or wander awkwardly into and out of the surround channel. It makes nearly all of my music CDs, and many TV shows, more enjoyable without calling undue attention to itself. Switching to Pure Direct mode (which is actually wonderfully clean, and is for highest-quality stereo-only handling of analog and two-channel sources) almost always sounds flat and less satisfying by comparison. Seven-channel stereo mode is also good for TV shows and CDs, giving room-filling sound with the surrounds driven nearly equally with the fronts. (There are a number of other soundfields, like Stadium, but I found most of them too gimmicky or show-offy to actually use. Stadium, for example, nicely isolates the play-by-play announcer's voice from a sportscast, and then gives it a HUGE echo that sounds like Lou Gehrig giving his farewell speech in Yankee Stadium. Just putting the announcer cleanly in the center speaker for the commentary, and boosting the ambience of the crowd in the surrounds to make you feel like you are at the game would have been a lot more usable and listenable.) DVDs I just play in straight Dolby Digital or DTS mode, both of which are handled superbly.
In addition to great sound, the other major strength of the 2807 is: inputs, inputs, and more inputs. DVD *and* Videodisc. TV *and* Satellite. Two VCR (or DVR) A/V record loops. A front panel input for your camcorder or game. Plus the usual audio in/outs: Phono, CD, Tape (and of course the internal tuner). All video sources have S-video jacks. You also get up to three component video and two HDMI ins, with upconversion, and plenty of digital audio in/outs, ALL assignable as needed. Plus, any of the inputs can be renamed on the display if needed! Don't have a laserdisc player? Use the "VDP" input for something else, and change its name accordingly. I connected my digital cable TV converter to the "DBS" input, and renamed the input "CABLE". Very slick.
The front panel of the 2807 is beautifully elegant and simple. Just power/standby, input select and volume knobs, and not much else, with all the other minutia tucked behind a (nice solid metal) flip-down panel. Sadly, the same can't be said of the learning, multi-brand remote. Some things on the remote are nicely done; the little button that chooses which component it will control (and nicely lights up the selection so you can see it) is placed perfectly where your thumb will easily find it. Same for the master volume adjustment. Nice ergonomics there. Basic functions aren't too hard to use, but the remote has enough buttons for an entire shirt factory, and after a few months, I am still trying to fathom the logic of why some things are grouped as they are, how to make it control my laserdisc player (which it theoretically should) etc. etc. And some things that SHOULD be on the remote, namely, dimming the front panel display, aren't. Plus, it doesn't have very good range. The remote that came with my cable box will easily work the 2807's volume etc. from a seat catty-corner across the room; the 2807's own remote needs to be closer and more on-angle. Most of the complaints you will hear in reviews about ease of use of the 2807 are really the fault of the remote. If after buying the 2807 you have enough left in your piggy bank for a really good programmable universal remote, it would be well worthwhile.
And while you're getting a better remote, pick up a good third-party FM antenna. I found the sensitivity of the 2807's internal FM tuner to be less than stellar, one of its few really weak points. Even strong local stations in my area don't come in all that cleanly using the (typical) cheap wire dipole antenna that is supplied.
Setup and adjustment of the 2807 is a bit tricky, but (for this computer professional) was not overly difficult. But, I did have to consult the manual frequently. For instance, I could easily find and navigate to the initial auto-setup command with the menu/right arrow/enter keys. But after getting there, it resisted all requests to actually start. Consulting the manual revealed that to actually make the auto-setup procedure GO, you have to press the LEFT arrow key at that final stage. (??!) The auto setup procedure, with supplied microphone, worked very well. It correctly identified the sizes and positions of my speakers, gave an error message when one of my surrounds had a loose wire, let me correct the issue and continue, and duly compensated for the fact that my new Polk center/surrounds are several dB more sensitive than my old B&W main speakers. Even so, I found the center speaker still WAY too prominent. Starting from the auto-setup's values, I boosted the left and right fronts slightly, and reduced the center speaker even more. Result was dialogue etc. nicely anchored in the center speaker, but it no longer sticking out like a sore thumb.
If you compare the Amazon pages for the Denon 3806 and 2807, noting the percentages of which item is bought after viewing both, you can easily see that with the 2807 Denon has hit a really sweet value point, giving you a lot of bang for the buck, with plenty of power and features but without useless frills. The differences between the 2807 and 3806 (an extra 10 watts per channel, the Denon Link multi-channel digital input for Denon's high-end DVD players, three-room/three source, touchscreen remote) are not worth several hundred more dollars for 99% of ordinary consumers. I had been considering the 3806, but when the 2807 came out, my choice was immediately clear.
Overall, the 2807 is a jewel. A beautiful sounding, solidly-built, top-quality component. Everyone in my family is thrilled with it. Its minor drawbacks are just that, minor. Highly recommended.
PS: I will repeat the comments of others about making sure to purchase the unit from an authorized merchant (I bought mine from Crutchfield) in order to have a valid warranty from Denon.

Click Here to see more reviews about: Denon AVR-2807 - AV receiver - 7.1 channel



Buy Now

Click here for more information about Denon AVR-2807 - AV receiver - 7.1 channel

Read More...

4/25/2012

Onkyo HTS590 5.1 Channel Component Home Theater Audio System Review

Onkyo HTS590 5.1 Channel  Component Home Theater Audio System
Average Reviews:

(More customer reviews)
I purchased this system based on reviews I read at a major retailer's website and here at Amazon. I wanted a home theater system without a DVD player which would offer flexibility. This system certainly offers performance and flexibility for the price. Many features and easy setup.
There are some easy and economical things we did to improve the sound. First, because this system allows you to upgrade the speaker wire, we bought 16 gauge speaker wire from a major discount chain for the center, front and rear channel speakers. We got 14 gauge speaker wire for the subwoofer (thicker wire passes more current to the sub and has improved the performance of the 8-inch woofer). We spent $14 for a coaxial cable at another discount store which carries the digital signal from the DVD player to the Onkyo receiver--this improved EVERYTHING--movies and music. We found speaker stands at a major discount chain for $78--speakers sound much better when they have a strong/rigid support. This may sound like stuff an audiophile would do to a $5000 audio system, but it all is cheap, easy and effective. Sound improved by about 45%.
We were surprised at the tuner in the Onkyo receiver--we're using a small Terk powered FM antenna and getting very good FM stereo reception in our hilly river community. All in all, for the small cost of this system, we're enjoying home theater greatly. We might spend a little to get a new sub at some time, but for now we're really happy.

Click Here to see more reviews about: Onkyo HTS590 5.1 Channel Component Home Theater Audio System

Onkyo 6 Channel HTIB HTS590

Buy Now

Click here for more information about Onkyo HTS590 5.1 Channel Component Home Theater Audio System

Read More...

4/16/2012

Sony STR-DG500 6.1 Channel Home Theater Receiver Review

Sony STR-DG500 6.1 Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
This 6.1 reciever offers 110 w/channel with subwoofer output. Sony has clearly worked to make the receiver smarter to provide the best audio experience with minimal intervention from the user: a microphone input (mic provided) automatically locates each speaker attached and balances all outputs.
If you're interested in simply having great home theater experience, without excessive tweaking, this is the reciever for you.
Pros - multiple a/v inputs, with support for component video and and optical connections for dvd audio.
Cons - no upsampling video sources (component output from component input only), no optical connection for cd players.

Click Here to see more reviews about: Sony STR-DG500 6.1 Channel Home Theater Receiver



Buy Now

Click here for more information about Sony STR-DG500 6.1 Channel Home Theater Receiver

Read More...

3/23/2012

Outlaw Audio Model 2200 Review

Outlaw Audio Model 2200
Average Reviews:

(More customer reviews)
After much debate I purchased the 2200 monoblock to power a passive sub for HT and stereo music. ~$50 cheaper through Amazon than through Outlaw's web page - even though it is still shipped directly from Outlaw???? I'm using the sub out from an Onkyo TX-SR605 receiver. I was originally considering a pro amp like QSC or Crown, but didn't want to deal with the line level voltage differences, or fan noise. I was worried that the 2200 didn't have level controls, EQ, Crossover like other SW amplifiers, but it turns out the Onkyo has more than enough flexibility to control these features. The 2200 easily overpowers the rest of the system and you can fine tune the amount of bass you want. This is a very impressive component. It is very low profile and provides lots of no nonsense power. It runs very cool as well, especially compared to the receiver. You can't go wrong. [...]

Click Here to see more reviews about: Outlaw Audio Model 2200



Buy Now

Click here for more information about Outlaw Audio Model 2200

Read More...

2/21/2012

Denon AVR1610 5.1-Channel Home Theater Receiver with 1080p HDMI Connectivity Review

Denon AVR1610 5.1-Channel Home Theater Receiver with 1080p HDMI Connectivity
Average Reviews:

(More customer reviews)
Based on a sub-$400 budget, I focused on this and the Yamaha 465. In researching it, a toss-up really emerged and the decision was made in talking to a very knowledgeable guy at Crutchfield. Having set it up last night and having played with it the better part of today, I am very content with my purchase. I fired up some Blu Ray's with both PCM and DTS-MA/ True HD and was very pleased with the upgrade over standard DD/DTS. The soundstage was just bigger. The opening scene from my kids favorite movie, Cars, was no longer weak. The opening race scene was clear and appropriately loud. The bump on my stars comes from the fact that the manual is awful. I gave up on it early on and went with the trial and error approach with the on-screen menu, which is more than adequate, but you need to have a basic tech sense in order to take that route. On another set-up note, the microphone setup is well done and made a big difference in the sound generated from my SS speakers, before versus after.

Click Here to see more reviews about: Denon AVR1610 5.1-Channel Home Theater Receiver with 1080p HDMI Connectivity

The Denon AVR-1610 5.1-Channel Home Theater Receiver - Performance, technology and affordability are the hallmarks of the AVR-1610. A powerful 5 channel x 75W amplifier section delivers detail and dynamics to music and movie soundtracks. It's equipped with 1080p compatible HDMI 1.3a Repeating technology, delivering both audio and video to your HDTV with single HDMI cable. This HDMI connectivity supports the latest generation surround sound formats available on Blu-ray disc, including Dolby TrueHD and DD+, dts-HD and dts-HR. Also included is Dolby Laboratories new Pro Logic IIz Matrix decoding featuring front height effects channels that expands front soundstage. The AVR1610 boast a number of Audyssey technologies. Advanced Audyssey MultEQ analyzes a speaker systems interaction with room acoustics, and then delivers custom tailored correction processing to optimize clarity and tonal balance throughout the listening space. Audyssey Dynamic Volume is an automatic volume-leveling system that tracks audio dynamics to eliminate the irritating volume swings between TV shows and commercials. Audyssey Dynamic EQ is also on board to ensure rich bass and smooth tonal balance at low volume listening levels. In addition to enhanced HDMI 1.3 repeating (3 in, 1 out), the AVR1610 features component video switching (2 in, 1 out), analog to HDMI conversion (480i to 480p) and seven analog inputs. A front-panel audio/video input allows quick and easy connection of camcorders and game systems. System setup is simplified by a new, enhanced icon-based on-screen display that is delivered over HDMI. System expansion is available with optional accessories. For media networking, use the optional ASD-3N and ASD-3W. For iPod connectivity, use the ASD-3N/3W, as well as the ASD-11. When connecting iPod and other MP3 players, the AVR-1610 features Denon's exclusive Compressed Audio Restorer to improve sound quality and dynamics.

Buy Now

Click here for more information about Denon AVR1610 5.1-Channel Home Theater Receiver with 1080p HDMI Connectivity

Read More...

1/28/2012

Yamaha RX-V863BL 735 Watt 7.1-Channel Home Theater Receiver Review

Yamaha RX-V863BL 735 Watt 7.1-Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
I've had this receiver & its ipod dock for about 45 days. Picked this one over the 663 for its video upscaling. I use it mainly for watching dvds and ipod videos, streaming netflix, and listening to ipod and HD radio music.
Pros: Quality of sound and video output met my high expectations. (I'm biased toward Yamaha already FWIW). Surround fields are versatile & distinct. The enhancer modes are fantastic for low volume listening. Headphone listening is stellar. Config menus are straightforward. YPAO was easy to set up, though I wound up tweaking rear speaker adjustments up a bit as personal preference. The remote runs all our gear. I dusted off old concert and movie DVDs and this receiver makes them seem new again.
Cons: No macro mode on the remote to power everything on & off with one button. HD radio control is not intuitive. So far I haven't figured out if I can navigate a docked ipod's menus with my TV osd which would be nice.
Bottom line: I saved up and looked at a LOT of receivers before choosing this one, and I'm not disappointed at all. The RX-V863 is everything advertised and lives up to Yammy's top shelf reputation.

Click Here to see more reviews about: Yamaha RX-V863BL 735 Watt 7.1-Channel Home Theater Receiver

The Yamaha RX-V863BL 7.2-channel digital home theater receiver delivers 735W powerful surround sound over 7 speakers (105W x 7).Full support for HD audio formats ensures maximum enjoyment of all high definition sources. Other advantages include full HD 1080p video upscaling with 3 HDMI inputs, an HD Radio tuner, as well as exclusive Yamaha features such as Pure Direct for the highest possible signal purity, YPAO sound optimization and 4 SCENE buttons for quick and easy browsing, selection, and automated setup of audio sources.

Buy Now

Click here for more information about Yamaha RX-V863BL 735 Watt 7.1-Channel Home Theater Receiver

Read More...

12/07/2011

Marantz NR1501 Slim Line Home Theater Receiver Review

Marantz NR1501 Slim Line Home Theater Receiver
Average Reviews:

(More customer reviews)
The Marantz NR1501 slim line model is only about 4" tall and really an excellent overall receiver. I bought this to replace a Sony STRG810. It was a toss up between a Denon, Yamaha or Marantz. The Sony STRG810 was a great receiver for movies but it was lacking sound quality in the music department (too much reverb). When comparing similar models, Yamaha was brighter then Denon, and Marantz was warmer then Denon, so I went with Marantz. I compared the Marantz NR1501 model to a Marantz SR6004 ($1300) side by side, and the audio quality was almost the same except the SR6004 was a bit more full at 110 watts per channel. I also compared the Marantz NR1501 to a Harmon Kardon AVR254 and the Marantz NR1501 sounded much better. The Harmon Kardon sounded too digital and tinny where the Marantz sounded true to its source. I am very pleased with how warm and clear the sound quality is while listening to music or watching movies.
The 50 watt NR1501 is more then enough wattage to power my reference series Klipsch speakers in a 13' x 17' living room. You may think that 50 watts is too low, but Marantz rates their receivers lower then what they are capable of. For example, Sony rates their receivers by putting a meter in the center of a testing room and increasing the volume as loud as it can go - distortion and all; they mark down what the wattage output is. Marantz does the same procedure except once they get to distortion, they back the knob off a little and mark down the wattage rating. That is why you will notice a lot of Marantz receivers are rated at 50,70, or 90 watts which is a lot lower then some of the 100,110 watt competition.
I usually set all the parameters (crossover frequency, speaker distance, db level etc.) by ear as I have with every receiver I purchase. I wanted to see how well this receiver would do with auto calibration, so I ran it. The receiver comes with a microphone so I put it on a camera tripod, set it to the listening position, and ran the auto cal procedure. Auto cal lasted about 3 minutes and played a series of test tones. When it was done, all of the levels were adjusted to the listening position. I manually went through these levels to see how well it did and I would not change a thing. This is an excellent receiver.


Click Here to see more reviews about: Marantz NR1501 Slim Line Home Theater Receiver


The svelte, competent Marantz NR1501 Slim Line Home Theater Receiver offers the features and flexibility you need--but without the hulking size you don't. The NR1501 includes everything you need in a chassis that fits comfortably on a normal shelf or in a standard cabinet. It's just a bit more than 4 inches high and 13 inches deep, so there's plenty of room for the cables you'll need to connect it to your flat-screen TV, a Blu-ray player, cable box, your favorite game console, a surround speaker system, and more.


Buy Now

Click here for more information about Marantz NR1501 Slim Line Home Theater Receiver

Read More...

11/28/2011

Pioneer VSX-1019AH-K 7-Channel Home Theater Receiver (Black) Review

Pioneer VSX-1019AH-K 7-Channel Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
I finally received my Pioneer 1019 last night. I ended up staying up way too late last night setting this up. I purchased the Pioneer 1019 after a lengthy decision process between the Denon 1910, Onkyo 607 and Yamaha 765. I needed 4 HDMI so the earlier models wouldn't work and I was also limited in footprint depth so it was these 4. I went with the Pio because I've always been a fan of the sound and quality and each of the others had one or two things wrong (Denon not available, Onkyo quality issues (?), Yammy no assignable inputs). My one concern with the Pio going in was the revamped amps and the decline in weight. Would it impact quality of sound and power? Based on my early tests, NO. This unit has a great, clean sound with lots of detail at low levels and high. I did not hear any hint of strain.
Design
While the unit is smaller and lighter than the 1018 it doesn't look `cheap' and it still has enough bulk to it to make you think it has power. It looks great in the rack. Remote is a bit confusing but I won't use that much after setup and the Harmony database had all the relevant codes, a nice surprise for such a recent release.
The Setup Process
It was pretty easy to get all of the speakers and components hooked up. The manual stinks but I had spent a fair amount of time with the manual online in advance and after a few reads you can fill in the blanks. It took me about an hour to get all of the old equipment out and the new equipment in. Assigning the inputs was relatively straightforward. Renaming inputs was awkward due to the way they handle text input but it was very flexible. I had a little trouble assigning the Optical audio signal from my Macbook along with an HDMI input. I first tried to assign the optical directly to an HDMI input but you can't do that. Instead I had to assign both the HDMI and Optical to an entirely different Input Name (I chose DVR). It worked fine but I suspect that means I really lost a video input since I can't send anything else to the original HDMI input. Not a huge deal as I don't use all the inputs but it was still annoying.
I haven't done MCACC yet but I did use the manual speaker setup and my speaker settings from my old Sony AVR and input those here. That was pretty easy and even with this rudimentary setup the sound was great. Even my wife (who is happy with TV speakers alone) commented on the improvement in quality.
I ran though some of the DSPs and effects but I prefer to set everything to DIRECT, especially on BDs but it was nice to use the Extended Stereo for my iPod and get sound from all of the speakers.
Video
I had lots of questions on the video scaler. I agree with most posters that you should not buy an AVR for this capability. Most TVs will do a better job than any $500 AVR. My TV is a 2006 model though and it has pretty average scaling so I wanted to see how it would look. I hooked up my Comcast DVR with both HDMI and with Component/Optical to gauge the difference. HDMI looks great (and no scaling, of course) but there was no impact on visual signal. I did not have any annoying audio lags either. Component also looks really good for HD signals. I could not tell the difference between the HDMI and Component signals on HD channels.
I then tried it on some SD channels with the scaler set to 1080p. The AVR did fine but it wasn't any better than my TV. No worse either but then I already mentioned my scaler is pretty average. So, as I said earlier, don't buy the unit for the scaler but it's not a negative either. Just try it for your sources and TV and it may or may not generate any improvement in PQ.
The good news is that it does a very good job of upconversion (switching analog signals to digital) which means you can have 6 HD sources (4 HDMI and 2 Component) which is nice.
The one odd thing I found was in the aspect ratio settings for 4:3 signals. The default is `Through' which would make me think it sends the signal untouched but it is actually for stretching the signal (and it does a bad job of that). I switched the signal to `Normal' and it then just passed the 4:3 signal untouched - a definite improvement.
All other sources looked great. Panny BD35 looks and sounds great and I was relieved to see that my Macbook was able to pass a clean signal through the AVR to the TV.
Audio
So the real question is about how this unit sounds. As I mentioned earlier, I am really pleased with the quality and balance. Everything sounds warm and detailed. I expect it to improve even further with the MCACC adjustments. I've listened to quite a few units over time and this has all of the Pioneer sound and quality you expect from them. I don't think anyone will be disappointed with the sound or the power (Of course, if you are willing to spend 3x the $$ then you can get better quality from the Elite series. If you have the cash, definitely buy one of those. If you are looking to spend

Click Here to see more reviews about: Pioneer VSX-1019AH-K 7-Channel Home Theater Receiver (Black)

The VSX-1019AH-K represents the pinnacle of the Pioneer receiver line.This hub for your home entertainment center allows you to enjoy your favorite movies on Blu-ray disc, DVD or VHS on your flat-panel television like never before. With standard features that include a phenomenal ability to upscale and convert analog video signals to 1080p when transmitted through HDMI to your high definition television, the VSX-1019AH-Ks video scaler presents you with nothing but the best quality possible today regardless of what video source it receives.

Buy NowGet 4% OFF

Click here for more information about Pioneer VSX-1019AH-K 7-Channel Home Theater Receiver (Black)

Read More...

11/27/2011

Marantz SR6005 7.2 Channel Home Theater Receiver Review

Marantz SR6005 7.2 Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
I purchased a Marantz receiver 2 1/2 years ago Right after having it for a touch over 2 years it dies.I have owned Denon Nikko Tandberg Old Marantz Sansui Kenwood Yamaya Revox and Nakamechi Never once did i have on die on me Esp after a short period of time I called Marantz and told them Marantz said It was not under warranty but they recomended I bring it to a FACTORY AUTHORIZED repair facility in Willmington De I brought it there and paid a fee to have it looked@
It was $40-45 dollars.After having it 3-4 days they called to say they cant repair it but to send it to this other Marantz repair facility in NY STATE This was mid afternoon on a Thursday Monday late afternoon I showed up to pick up my unit Its an hours drive from Philadelphia each way
The unit was still in pieces They had FRIDAY half a day Saturday and most of Monday to have it ready I had just gone through a very painfull operation I was not feeling well Money was tight and I wanted my stereo fixed so I could have music during the many weeks recoup time The repair facility could have cared less about wasting my time my gas and that I was not well and I just drove 2 hours for no reason The woman basically shrugged her shoulders at me
I called Marantz After all it was their product and they recomended this location to me PLUS IT was a factory authorized repair center Marantz could have cared less The unit was out of warranty and they refused to help me Their attitude was poor They offered me no help or recourse The products Marantz now sells may be higher priced and such but their product is MADE IN CHINA Audiophile prices with MADE IN CHINA lack of quality with near zero customer support Dont buy Marantz look elsewhere Their product is NOT good and their support even worse

Click Here to see more reviews about: Marantz SR6005 7.2 Channel Home Theater Receiver



Buy Now

Click here for more information about Marantz SR6005 7.2 Channel Home Theater Receiver

Read More...

10/19/2011

Onkyo TX-NR808 7.2-Channel Network Home Theater Receiver (Black) Review

Onkyo TX-NR808 7.2-Channel Network Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
I bought the ONKYO TX-NR808 to replace my aging 10 year old Lexicon DC-2 pre-amp and Carver Professional amps. The Onkyo powering Miller and Kreisel THX 750 5.1 speaker system.
I figured that after 10 years I could use a audio update even though the Lexicon is still a amazing piece of equipment but I didn't want to spend $6500 this time around.
I wanted a receiver that had all of the newer DTS and Dolby surround formats and could power the 4 ohm M&K speakers.
It sounds great I love the video switching and the great on screen display of settings.
I have a Netgear 9150 Digital entertainer Elite hooked to it with only one HDMI cable. Being able to use the HDMI really cleans up the cabling since it can also send the audio over the same cable. Same thing goes for my HD cable box, HDMI no seperate audio cable needed.
I haven't had any problems with the Ethernet not connecting, even though I did let it update via the internet. The streaming off connected networked computer is nice also, without any problems. Pandora works flawlessly.
For the price and features it cannot be beat.
Also Amazon has it for the lowest price.


Click Here to see more reviews about: Onkyo TX-NR808 7.2-Channel Network Home Theater Receiver (Black)

Meet Onkyo's mid-range powerhouse. The TX-NR808 earns its prestigious THX Select2 Plus certification by blending the latest connectivity and processing technology with Onkyo's renowned amplification prowess. As a network-capable receiver, the TX-NR808 is your gateway to streaming audio from your PC or internet radio. Other connection highlights include seven HDMI 1.4a inputs with 3D and Audio Return Channel capability; 7.1-multichannel analog inputs for legacy components; a Universal port for Onkyo peripherals; a USB port for iPod models and flash memory devices; and an analog RGB video input for your PC. Employing two advanced 32-bit DSP chips and low-jitter 24-bit Burr-Brown DACs, the TX-NR808 effortlessly handles your audio-processing needs. Whether it's lossless Dolby and DTS formats on Blu-ray Disc, or new-dimension surround formats from Audyssey and Dolby, your audio signals retain every lifelike nuance.All things considered, the TX-NR808 is a serious challenger for the middleweight crown.

Buy NowGet 9% OFF

Click here for more information about Onkyo TX-NR808 7.2-Channel Network Home Theater Receiver (Black)

Read More...